PRODUCTS AND ACCESSORIES

ATTACHMENTS

Attachments and complete tools

image73

362 Multitool Attachment

  •  36" x 2" (915 x 50mm) belt. 
  •  7" (178mm) diameter disc.
  • 3 1/2" (89mm) diameter rubber contact wheel.
  • 5 1/2" (140mm) diameter drive wheel.
  • Suits most popular 6" or 8" bench grinders with a screw mounted wheel guard and a minimum of 1/3 HP.
  • Suits grinder shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".
  • Fitting kit supplied.

image74

364 Multitool Attachment

  •  36" x 4" wide (915 x 100mm) belt.
  • 7" (178mm) diameter disc.
  • 3 1/2" (89mm) diameter rubber contact wheel.
  • 5 1/2" (140mm) diameter drive wheel.
  • The 364 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
  • Suits grinder shafts sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".
  • Fitting kit supplied.

image75

482 Multitool Attachment

  •  48" x 2" (1220 x 50mm) belt.
  • 7" (178mm) diameter disc.
  • 3 1/2" (89mm) diameter rubber contact wheel.
  • 5 1/2" (140mm) diameter drive wheel.
  • The 482 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
  • Suits shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".
  • Fitting kit supplied.

image76

484 Multitool Attachment

  • 48" x 4" wide (1220 x 100mm) belt.
  • 7" (178mm) diameter disc.
  • 3 1/2" (89mm) diameter rubber contact wheel.
  • 5 1/2" (140mm) diameter drive wheel.
  • The 484 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP.
  • Suits shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".
  • Fitting kit supplied.

image77

8CW Multitool Attachment

  • 48" x 2"  belt
  • 7" (178mm) diameter disc.
  • 8" (204mm) diameter contact wheel
  • Suits most 8" bench grinders with screw mounted wheel guards and a minimum of 1/2 HP
  • 8" contact wheel is ideal for the hollow grinding of knives.
  • Fitting kit supplied.

Accessories

Accessories designed for the Multitool range.

image78

Sharpening Jig

  • The Sharpening Jig is suitable for all Multitool models with the exception of the 8CW. 
  • Quickly sharpens Chisels, Plane Blades and Power Planer Blades to correct angles without overheating. 
  • Screwdrivers can also be re-ground to provide maximum driving efficiency. 
  • Installs and removes easily to the end of the Multitool.
  • Sharpens chisels to 50 mm, plane blades to 60 mm, power planer blades to     82 mm.
  • Get professional results in a fraction of the time taken by conventional sharpening methods.

image79

Mitre Table

  •  Using the Mitre Table is an accurate way to grind ends square or to any angle.
  • Used for disc grinding and sanding.
  • Fits all Multitool models with a 7" (178 mm) diameter sanding disc.
  • Table can be tilted up 5°and down 50°
  • Table measures 4 3/4" x 10" (110 mm x 254 mm)
  • Mitre Bracket can be swiveled plus and minus 60° from square.


image80

Pin Spanner

  •  Universal Pin Spanner
  • Pin centers adjustable from 18 mm centers to 39 mm centers.
  • Suits most angle grinders and pneumatic tools.

Pictures of the accessories attached to the multitool can be found on the gallery page